Primary:      0478 535 743

Secondary:   0478 535 745

 

Categories Categories

ZD1633L 12V 100W, (Dual Speed) 30/55 RPM, 8-50Nm Torque (Left Angle)

$124.44 (Includes GST)
10 days
Weight: 3.000 kg
DAYG10140
In stock
+
Worm Gear Motor ZD1633L 8-50Nm 30 and 55 RPM

 

These are traditionally built and used for car wipers, but they can also be run as a highly efficient worm drive motor.
This particular unit has extremely tight tolerances (zero backlash) and an ultra smooth motor and gearbox. 
While it is operating you can barely hear it, that's how quiet the motor and gearbox are. 

This smaller unit has a rating of 6nM, and will overdrive to a maximum (and stall at) 50nM. It is an extremely powerful motor for its small size.
It operates from 12V and has 2 operational speeds (either 30 RPM or 55 RPM - User selectable speeds)

These are a good choice if you are on a budget simply for the fact you can overdrive them with little more than some extra current. The worm will actually stall at 50Nm but it will only hold torque to about 80% of its rated load (so between 7-8nM).

There are a few different manufacturers that make this motor and gearbox combination with the same name (or similar), but we believe we've found the best. This is an extremely well built unit and represents great value for the cost.

To connect these as a normal worm drive, hook the Negative to the chassis of the unit, and either the Green wire or Blue wire for low or high speeds.

 

Technical Parameters

 

Rating Voltage: 12V-13.5V
Rating Power: 100W
No Load Current: 2.0/2.5A
No Load Speed:  30/55 +/- 5 RPM
Load Current: 8.5/10A
Load Speed: 25/50 +/- 5 RPM
Stall Current: 40A (max)
Stall Torque: 50NM (min) 

 

Wireing is as follows:

Fast RPM:

White wire + Black wire


Slow RPM:

Blue wire + Black wire

to reverse the polariity, simply exchange the position of the battery postivie for the battery negative

 

 PLEASE NOTE THAT THESE CONNECTIONS WERE CORRECT LAST TIME WE TESTED THIS MOTOR IF THESE CONNECTIONS DO NOT WORK, PLEASE LET US KNOW.