Categories Categories

ZD1530L 12V 50W, 45/65 RPM (Dual Speed) 5-29Nm (Left Angle)

$54.95 (Inc GST)
Weight: 1.300 kg
DAYG10100
Out of stock
Worm Gear Motor ZD1530L 29Nm 45 and 65 RPM (Dual Speed) Left Angle

 

These are traditionally built and used for car wipers, but they can also be run as a highly efficient worm drive motor. This particular unit has extremely tight tolerances (zero backlash) and an ultra smooth motor and gearbox. While it is operating you can barely hear it, that's how quiet the motor and gearbox are.

This smaller unit has a rating of 5nM, and will overdrive to a maximum (and stall at) 29nM. It is an extremely powerful motor for its small size. It operates from 12V and has 2 operational speeds (either 45 RPM or 65 RPM - User selectable speeds)

These are a good choice if you are on a budget simply for the fact you can overdrive them with little more than some extra current. The worm will actually stall at 29Nm but it will only hold torque to about 80% of its rated load (so between 4-5nM).

There are a few different manufacturers that make this motor and gearbox combination with the same name (or similar), but we believe we've found the best. This is an extremely well built unit and represents great value for the cost.

To connect these as a normal worm drive, hook the Negative to the chassis of the unit, and either the Green wire or Blue wire for low or high speeds.

Have fun!

Technical Parameters

Rating Voltage: 12V
Rating Power: 50W
No Load Current: 2.0/2.5A
No Load Speed: 45/65 +/- 5 RPM
Load Current: 6.5/7.5A 3.5/5A
Load Speed: 40/60 +/- 5 RPM
Stall Current: 31A (max)
Stall Torque: 29NM (min)
Protction Class: IP33

 

Wireing is as follows:

Fast RPM:

Black wire to Blue wire


Slow RPM:

Black wire to Grey wire

to reverse the polariity, simply exchange the position of the battery postivie for the battery negative

 

PLEASE NOTE THAT THESE CONNECTIONS WERE CORRECT LAST TIME WE TESTED THIS MOTOR IF THESE CONNECTIONS DO NOT WORK, PLEASE LET US KNOW.

 

Please note, this shows the right angle drive for reference, the left angle drive has identical dimensions.