12-48V DC Speed Controller (Bi-Directional) 100A Maximum 60A Continuous

Introducing our enhanced 12-48V DC Speed Controller (Bi-Directional), now equipped with even more robust features to meet your needs! This reliable and easy-to-use controller allows you to control the speed and direction of your DC motor effortlessly.

Notably, we have upgraded the unit with 3x much more powerful diodes, making it much more capable of handling inductive loads such as DC motors

Please note that although this controller can handle substantial current, if you plan to use it with a DC motor, we strongly advise utilizing the included SNUBBER KIT! The snubber kit, along with the enhanced diode protection, safeguards the controller from voltage spikes that may occur due to motor-induced back EMF. This is particularly important when operating with motors in the 600-800W range, as they can push a significant amount of power back into the controller.

The functionality remains wonderfully simple, with a 3-position rocker switch providing forward, reverse, and a neutral option. The on/off function is conveniently integrated into the 100K potentiometer – a simple turn all the way down until you hear a satisfying click, and the unit powers off.

The unit also features soft-start, ensuring a smooth start-up when you use the potentiometer from an OFF position. Additionally, the digital display indicates the speed setting between 001-100, giving you real-time feedback on the motor's rotation speed. A value of 50 on the LED readout indicates the controller is set to 50% of the loads' maximum rated speed.

Setting up the controller is as easy as connecting four wires. Remember to ensure the correct battery positive/negative positioning when connecting it to power. As for the load positive/negative, you have the flexibility to attach them to either of the motor terminals.

Just remember, the maximum current you can draw from this unit is 100A, and it is essential not to run it at this level for extended periods, as it may impact its lifespan. For optimal performance, we recommend using the controller with motors up to around 600-800W.

For non-inductive loads, such as resistive loads, the controller operates smoothly without the need for a snubber kit. You can run these loads at higher currents, thanks to their linear characteristics.

Experience the power and efficiency of our upgraded bi-directional controller, now fully equipped to handle inductive loads such as DC motors, making it an ideal choice for your various motor applications and beyond!

Output voltage: linear under load
Maximum current: 100A (Momentarily)
Continuous current: 60A
Speed regulation type: Voltage regulation
Speed regulation mode: Potentiometer (linear with a display to show you where you are in your potentiometer range)
Supported motor type: Non inductive loads or (DC brushed motors with a snubber kit attached)
Speed range: 0—100%
Control frequency: 15KHZ
Wiring type: Terminal Knob
Pot Specification: 100K (dual pot, one part the on/off at the most anti clockwise position, and the other part is the speed regulation)
Wiring type: Fence terminal block
PCB size: 120MM*95MM*30MM