MY1016Z Geared United 350W, 24V DC Brushed Motor, 400 RPM
Ok, this is a cheap price for a my1016z 350w. You see people selling them as 500w. Its FAKE people!! Its just a 350W motor with a new label. They increase the voltage to reduce the current and say 500W. The problem is that the motor runs very HOT! So a 500W version of this model DOES NOT EXIST. ALL of the CHEAPER 350w my1016z I could find on eBay and Amazon were all 250w models with 350W labels on them! (FAKE, GET IT ?)
IF THEY ARE CHEAPER THAN US, THEY ARE LIKELY FAKE. THERE IS NO 500W VERSIONS OF THESE! The gears can't sustain the overload! They're ONLY nylon! Thats why the next model up in this series (MY1018 450W) has METAL GEARS!!!
DON'T GET RIPPED OFF! Use your brains people! We don't make big profits on these which is why its so hard to compete with us. We don't need to use fake labels.
This popular reduction motor is the big brother of the most commonly used motor for scooters, bikes and quad's available on the market today (the 250w version).
It is normally found in the bigger quads and scooters on the market.
Most people use this 350W motor as a direct plug in replacement for the smaller 250W version. It's a good choice if your kids are getting a little too big for their existing toy carts and get stuck on grass or slight inclines etc.
It is slightly longer than the 250W but with the same mounting bracket which makes these a painless swap over replacement.
They are quite powerful for their small size and extremely reliable. We've sold these for so many different applications that they were never designed for, but the robustness of the build makes them just go and go and go!
You wont find these in the cheap kiddie carts, but you will on the higher quality or more expensive models!
These are reversible simply by reversing the polarity to the motor.
Be aware if you are swapping out a 250W motor that this 350W motor draws more current, so make sure that your existing controller is capable of driving it! Most Chinese controllers are not flexible enough to suport the additional current draw of these larger models.
Specifications:
- MY1016Z
- 24 Volt DC Operation
- Permanent Magnet DC Motor
- No Load RPM: 3850
- No Load Current: <2.2 Amps
- Rated Wattage: 350W (0.33 Horsepower)
- Rated Load RPM: 3000
- Torque (NM): 1.1
- Rated Current: 18.7 Amps
- Efficiency: 78%
- Reduction Ratio: 9.78:1
- Direct Drive (No Free Spooling)
- Suitable for Forward and Reverse Operations
- Base Mount Model
- 9 Tooth Sprocket for 1/2" x 1/8" Pitch Chain
This motor is capable of rotation in either clockwise or counter clockwise by reversing the motor's power wires.
Please note that these would be illegal to connect to your Electric Bike or Scooter, The maximum legal limit is 200w.
