40W Geared induction Motor
GPG 90mm 40W Geared AC Speed Control Motor, suitable for single direction operation, or reversing operations (Reversing operations can only happen once the motor has come to a complete stop)
Supplied as Lead Wire type motor.
Available in: Single Phase, 220-240V
For example, if you get a 200:1 gear head, at 90 RPM (lowest speed) the output RPM from the gearbox will be 90/200 (90 rpm divided by 200:1 ratio) = 0.45 RPM and at its highest speed would be 1350/200 (1400 RPM divided by 200:1) = 6.75 RPM
Gearbox Selection Guide:
Use to determine the required torque and RPM
5GN Ratios: 3:1 - 200:1
Motor Length: 119mm
3:1-20:1 Length: 32mm
25:1-200:1 Length: 44mm
To get the total length just add the motor length to the length of the gearbox that you require.
A Wiring diagram can be found here: https://www.motiondynamics.com.au/support-information.html
Note: Should only be wired by a LICENSED Electrical Installer.
Please note that speeds can vary between 2-20% dependant on motor loading!
DANGER: HIGH VOLTAGES!