25W Geared induction Motor
GPG 25W Geared AC Speed Control Motor, suitable for single direction operation, or reversing operations (Reversing operations can only happen once the motor has come to a complete stop)
Supplied as Lead Wire type only.
Available in: Single Phase, 220-240V
Please note, All GPG 6Watt-120Watt Speed control motors have a 90-1350 RPM motor output speed. This is with no gearbox attached.
To work out your gearbox speed, divide the rpm into the ratio you require.
For example, if you get a 200:1 gearbox, at 90 RPM (lowest speed) the output RPM from the gearbox will be 90/200 (90 rpm divided by 200:1 ratio) = 0.45 RPM and at its highest speed would be 1350/200 (1400 RPM divided by 200:1) = 6.75 RPM
Motor Information:
Gearbox Selection Guide:
Use to determine the required torque and RPM
4GN Ratios: 3:1 - 200:1
Motor Length: 99mm
3:1-20:1 Length: 32mm
25:1-200:1 Length: 44mm
To get the total length just add the motor length to the length of the gearbox that you require.
A Wiring diagram can be found here: https://www.motiondynamics.com.au/support-information.html
Note: Should only be wired by a LICENSED Electrical Installer.
Please note that speeds can vary between 2-20% dependant on motor loading!
DANGER: HIGH VOLTAGES!
