6W Geared induction Motor
GPG 6W Geared AC Speed Control Motor
Supplied as Lead Wire only. Available in Single Phase, 220-240V
Please note, All GPG 6Watt-120Watt Speed control motors have a 90-1350 RPM motor output speed from the speed control module. This is with no gearbox attached.
To work out your gearbox speed, divide the rpm into the ratio you require.
For example, if you get a 200:1 gearbox, at 90 RPM (lowest speed) the output RPM from the gearbox will be 90/200 (90 rpm divided by 200:1 ratio) = 0.45 RPM and at its highest speed would be 1350/200 (1400 RPM divided by 200:1) = 6.75 RPM
Motor Information:
2GN Ratios: 3:1 - 250:1
Motor Length: 89mm
3:1-20:1 Length: 33mm
25:1-250:1 Length: 42mm
To get the total length just add the motor length to the length of the gearbox that youu require.
A Wiring diagram can be found here: https://www.motiondynamics.com.au/support-information.html
Note: Should only be wired by a LICENSED Electrical Installer.
Please note that speeds can vary between 2-20% dependant on motor loading!
DANGER: HIGH VOLTAGES!