Titan 90mm 40 Watt, 240V 50 Hz Reversible Induction Motor (With Damp Brake)
Please NOTE!
ALL Titan 40/60W Motors now have an upgraded 12mm (5GU) Motor Output Shaft (Rather than the standard 10mm 5GN), so all maximum torque values are 19.6Nm, not 9.8Nm as stated in the data.
Ratios and Speed remain the same.
Specification
Gear Ratios/Torque (50 HZ)
This is the permissible torque of the assembled motor and gearbox.
Rotational speed is based on synchronous speed (50Hz : 1500rpm, 60Hz : 1800rpm) divided by gear ratio. The actual rotation speed is approx 2-20% than the displayed value dependent upon the load.
Titan 90mm 40 Watt, 220-240V 50 Hz Reversible Induction Motor (With Damp Brake)
Please NOTE!
ALL Titan 40/60W Motors now have an upgraded 12mm (5GU) Motor Output Shaft (Rather than the standard 10mm 5GN), so all maximum torque values are 19.6Nm, not 9.8Nm as stated in the data.
Ratios and Speed remain the same.
Specification
Gearbox Selection Guide:
Select the speed you require in blue, and  match it up to the ratio required.
Alternatively  you can just use power frequency for your country X 30 divided by the speed you require
which gives you the ratio you need.
E.g. I want 272 RPM, and Australia is 50Hz, so it's 50X30/272 =5.5 Ratio. There's no 5.5 ratio, so I
can either select 5:1 (300 RPM) or 6:1 (250 RPM).
Gear Ratios/Torque (50 HZ)
