Gearboxes to suit all GPG AC & DC 40W and 60W 90mm Motors
This gearbox will physically fit onto the 90W AC & DC motors as well as the 120W AC units, however because its torque capacity is only 9.8Nm (this is the max rated torque which the gearbox is able to throughput) its not often used with the higher power motors.
You'd only use this gearbox with the 90W or 120W units if you specifically needed a 12mm output shaft OR if you were using a ratio low enough that the higher torque capacity of the GU gearbox would be wasted (30:1 or below on the 90W DC Units, 20:1 on the 90W AC units, and 15:1 on the 120W AC units).
Performance chart when matched with a 40W DC Unit
Performance chart when matched with a 60W DC Unit
Performance chart when matched with a 40W AC Unit
Performance chart when matched with a 60W AC Unit
GPG Gearbox (5GN-90mm):
75:1
