30A Unidirectional Controller 12V-36V Case Model
We're forever being asked for a stripped down budget version of our controllers, and here it is!
Comes with an RC snubber to help protect your controller from indictive loads!
While its not heavy on features, it has got what we look for first and foremost in controllers - reliability. It's also an insanely cost effective soloution to smaller scale control requirements.
The case is simple to open, and has openings on either end for the connections.
Once its opened the connections are simple; wire up your battery and motor and you're set.
No really, thats it. The 100k pot comes pre-attached, and features an integrated on/off function. Just wire in the battery and motor and everything will be ready to go!
This unit comes with a preset soft start, its subtle, but the turning the unit on with the potentiomemer at full power will result in the unit reaching its top speed over the course of roughly a second.
This unit can also be taken out of its case and used as a PCB type control board.
Output Voltage: Linear with load
Output Current: 0 to 40A.
Continuous Current: 30A max
Frequency: 200hz.
Frequency: 200hz.
Speed range: 5%-100% (We have found while testing with various motors that when at its lowest, the motor does come to a complete stop but emits a frequency whine)
Case size: 105x55x40mm
PCB Size: 90x51x27mm
