Worm Gear Motor ZD1530 29Nm 45 and 65 RPM
These are traditionally built and used for car wipers, but they can also be run as a highly efficient worm drive motor.
This particular unit has extremely tight tolerances (zero backlash) and an ultra smooth motor and gearbox.
While it is operating you can barely hear it, that's how quiet the motor and gearbox are.
This smaller unit has a rating of 5nM, and will overdrive to a maximum (and stall at) 29nM. It is an extremely powerful motor for its small size.
It operates from 12V and has 2 operational speeds (either 45 RPM or 65 RPM - User selectable speeds)
These are a good choice if you are on a budget simply for the fact you can overdrive them with little more than some extra current. The worm will actually stall at 29Nm but it will only hold torque to about 80% of its rated load (so between 4-5nM).
There are a few different manufacturers that make this motor and gearbox combination with the same name (or similar), but we believe we've found the best. This is an extremely well built unit and represents great value for the cost.
Have fun!
Technical Parameters:
| Rating Voltage: | 12V |
| Rating Power: | 50W |
| No Load Current: | 2.0/2.5A |
| No Load Speed: | 45/65 +/- 5 RPM |
| Load Current: | 6.5/7.5A 3.5/5A |
| Load Speed: | 40/60 +/- 5 RPM |
| Stall Current: | 31A (max) |
| Stall Torque: | 29NM (min) |
| Protction Class: | IP33 |
Wiring is as follows:
Fast RPM:
Black wire + Green wire
Slow RPM:
Black wire + Blue wire
to reverse the polariity, simply exchange the position of the battery postivie for the battery negative
PLEASE NOTE THAT THESE CONNECTIONS WERE CORRECT LAST TIME WE TESTED THIS MOTOR IF THESE CONNECTIONS DO NOT WORK, PLEASE LET US KNOW.
